EPS screw compactor KDM-150
The second largest EPS screw compactor for foam plastic
EPS screw compactor Ecopolymer KDM-150 is the second (from smaller to larger) equipment for compacting foam (polystyrene) and is recommended for an expected annual production volume of 10-30 tons.
Used foam packaging and packaging materials (such as fish boxes, consumer and digital packaging, etc.) in retail and industry take up a lot of space and require frequent removal. If you regularly accumulate foam plastic waste, this equipment will be an excellent helper for you.
Get acquainted with the principle of its operation in the video
Foam plastic (EPS, Styrofoam, foam polystyrene) is pre-crushed in a hopper, and then compacted by an auger and an automatic hydraulic plate into solid, homogeneous blocks.
The preliminary internal crusher is selected and installed based on the density and size of the foam waste.
Therefore, the EPS screw compactor Ecopolymer KDM-150 solves the problem not only of saving space in the warehouse, but also of saving money for the disposal of foam plastic.
Thanks to the use of a compactor, you can save or even make money on the sale of ready-made compressed blocks.
This EPS screw compactor can compact foam (polystyrene, Styrofoam, EPS) in a ratio of up to 50:1!
In practice, this means that it used to take about 50 trucks to haul away the Styrofoam waste, but now it’s only one truck!!
What a EPS screw compactor gives: saving space, saving costs and the opportunity to earn extra
Thanks to Ecopolymer EPS screw compactors, you can:
– save space in the warehouse;
– reduce costs for waste removal and disposal;
– to make a profit from the sale of ready-made compacted blocks.
Ready-made blocks are easily carried and transported
After passing through the EPS screw compactor, compressed foam takes up much less space and is much easier to transport.
The compactor compresses the foam packaging in a ratio of 50:1‼️
That is, before, it took about 50 trucks to remove foam waste, and now – one truck‼️
Safe and easy work with Unitronics PLCs
A PLC is a programmable logic controller that allows you to program the necessary operations to work with equipment and facilitate its management.
Simple and clear technology
The equipment is equipped with a hopper into which the material is loaded; a preliminary shredder that grinds it; and an auger that presses it into dense blocks (briquettes).
Lifting cover for the hopper
Prevents material from falling out during pressing (briquetting) and provides better noise insulation.
Sound insulation of the hopper and lid – reduces noise by 10-15 dB
For retail stores, we recommend that the equipment be equipped with soundproofing material in the hopper and lid.
Compare our models
| Characteristics |  | | |
| Model | KDM-70 | KDM-150 | |
| Productivity per hour (kg) | 20 | 35-40 | |
| Achieved density (kg/m3) | 200-250 | 200-250 | |
| Block size (mm) | 120×120 | 150х150 | |
| Hopper opening (mm) | 750х320 | 1010х700 | |
| Main drive (kW) | 2,2 | 3 | |
| Pre-crusher (kW) | – | 2,2 | |
| Weight (approx. (kg)) | 300 | 750 |
Additional accessories
For special requirements, we offer individual accessories for this shredder:
- Enlarged bunker
The enlarged hopper for the compactor serves for the convenience of loading large pieces of foam, polypropylene and other materials. It also prevents […] - Guillotine
The guillotine installed on the compactor is used to cut dense material into blocks of the required length. - Conveyor belt
The conveyor belt transports the material through the metal detector into the loading hopper. The belt automatically stops when metallic material is detected […] - Built-in heating zone
The heating zone for the KDM-360 compactor serves to prevent the disintegration of compacted polystyrene foam, propylene foam and other materials. Heated by […]
Interested in this equipment?
Contact us!
We will be happy to answer your questions and provide consultation.