Hydraulic log splitter Ecopolymer Pinocchio LSH 520/7

Hydraulic log splitter Ecopolymer Pinocchio LSH 520/7

This hydraulic log splitter is a proprietary development of the Ecopolymer company. Due to the original design features, it is powerful, reliable and easy to use.

The use of such equipment significantly reduces physical stress and makes the process of splitting wood more efficient. Thanks to the saving of effort and time, as a result, you will receive a significant benefit.

This equipment can be used not only for household needs. Unlike Chinese and European analogues (which are also made in China), our log splitter was designed for use in both domestic and industrial firewood harvesting.

Technical characteristics

CharacteristicsHydraulic log splitter Ecopolymer Pinocchio LSH 520/7
ModelPinocchio LSH 520/7
Splitting principleHydraulic
Working positionHorizontal
Maximum splitting force7 ton
Maximum log length520 mm
Maximum log diameter300 mm
Splitting Time~8 sec
Speed ​​of the hydraulic mechanism (forward movement)3,1 cm/sec
Speed ​​of the hydraulic mechanism (reverse movement)5,29 cm/sec
Hydraulic oil tank5 L
Working pressure180 bar
Engine power1500 W, S3 40%, 7,5 A
Engine speed1500 rpm
Voltage230 V~ / 50 Hz
Protection classIP54
Power cable length1,6 m
Wheel size175 mm
Dimensions (WxHxD)1260 х 635 х 435 мм
Weight without stand97 kg
Weight with stand106 kg
Complete setLog splitter, wheels, manual
Warranty6 months

Advantages of the log splitter Ecopolymer

The advantages of this wood splitter compared to models of Chinese and European brands (which, as it turned out, are also made in China):

  • Absence of silumin details. In case of breakdown, such parts are extremely difficult to repair. The failure of one such small part can put the woodcutter out of order for a very long time and cause many problems to restore it.
  • The engine start/stop button works in the following mode: press – the engine starts, the next press – the engine stops. This allows one hand of the operator to be freed. In addition, the operator does not need to lean in the direction of splitting in order to constantly hold the button.
  • Professional hydraulics. Steel piston and steel hydraulic parts, high-quality components intended for industrial equipment.
  • Quality engine. Competitors’ models are equipped with cheap engines of lower quality.
  • Metal quality. Chinese metal is famous for its unreliability and the possibility of splitting or rusting. Our woodcutter is made of Ukrainian steel.
  • Increased capacity for oil. Allows you to change the oil not so often.
  • Spikes are already welded on the pressure plate. This improves the grip and pressure of the material against the splitting knife and, in addition, protects the operator from sliding and jumping out of the wood.
  • Easily replaceable parts. At the time of manufacture of the wood chipper, all replaceable parts are easily available for purchase and replacement on the territory of Ukraine.
  • Designed not only for household, but also for industrial use. Commercial or industrial use by other manufacturers is expressly prohibited in the operating instructions and leads to the loss of warranty obligations. Our wood chipper is designed for industrial use.

The Ecopolymer company is a manufacturer of industrial equipment for the field of waste processing (wood, plastic, rubber) and manufactures complex electromechanical, hydraulic and other devices on an ongoing basis. By purchasing equipment of our production, you get a high-quality, reliable, professional tool for many years!

Contact us at the phone number indicated in the contacts

Details about the hydraulic log splitter

What is a hydraulic log splitter and why is it needed?

A hydraulic log splitter is a special device used to split large logs into firewood, thanks to a powerful hydraulic mechanism.

A hydraulic log splitter significantly simplifies the process of firewood preparation, significantly reducing physical exertion and increasing work efficiency.

Advantages of using a hydraulic log splitter

The hydraulic wood splitter provides the following advantages:

  • Reduced physical strain: Using a log splitter significantly reduces physical strain compared to manual splitting of wood.
  • Safety: A log splitter is a much safer tool compared to a chopping axe, reducing the risk of injury.
  • Time savings: By automating the process, you can save a lot of time.
  • Productivity: Thanks to the time savings, a significantly larger amount of wood can be processed, increasing the overall productivity of the work.
  • Economic benefit: Using a wood splitter makes work much more efficient, which ultimately provides a significant economic benefit.

Considering these advantages, the use of hydraulic wood splitters is gaining more and more popularity and distribution.

Construction of a hydraulic log splitter

This equipment is a metal frame with legs, in the middle of which is placed a log for splitting. On one side of the bed there is a stationary metal pick, and on the other – a pressure heel.

Inside the hydraulic log splitter there is a hydraulic system that provides a powerful clamp. The hydraulics control lever is located at the back. Below is the engine and the engine start button.

When the engine is started and the hydraulics lever is pressed, the clamping heel moves the log in the direction of the cleaver and firmly presses it against it. Cleaver- cuts into the wood, and thus splitting occurs.

In this video you can see the hydraulic log splitter in action:

Where are log splitters used?

Log splitters are used in private farms and enterprises, where it is necessary to efficiently and quickly harvest wood for heating. Here are the main areas of their use:

  • Household: To prepare firewood for heating houses and baths.
  • Private firewood harvesting enterprises: For many hours of work on splitting wood into firewood and selling to wholesale and retail customers.
  • Forestry: For splitting wood on an industrial scale.
  • Wood-fired boiler rooms: To prepare wood for wood-fired boilers.
  • Garden and landscape organizations: For the disposal or processing of wood that accumulates in the course of their activities.
ax, firewood, logs, hydraulic log splitter
wood, wood harvesting, hydraulic log splitter
solid fuel boiler, coal, fire
felling a tree, chainsaw

The advantages of vertical presses and balers are from Ecopolymer

Specialization

We specialize in manufacturing equipment for the processing industry. We constantly accumulate valuable experience and improve the equipment so that it is the optimal solution in this field

Equipment quality

We manufacture high-quality metal structures and use the best electrical and hydraulic components to ensure high reliability of the equipment

Ease of work
and ease of management

All our equipment is as simple as possible to operate and is equipped with automatic control cabinets for easy and understandable use

Individual development

We develop equipment specifically for the individual requirements and tasks of the client

Delivery

We deliver equipment across Ukraine and to European countries. The cost of delivery is calculated separately

Installation and instruction

We carry out installation, commissioning and commissioning of equipment. We conduct training for the staff before the start of use

Warranty

The warranty is provided for all equipment of the Ecopolymer company. The term and terms of the warranty depends on the type of equipment

Service

We provide qualified service. We help you keep equipment in excellent working order and without downtime

Interested in equipment?

Contact us!

I will be happy to answer your questions and provide a consultation.